Ransburg Aerobell 168 A12787 - Manual (Page 79)

Aerobell 168 - Maintenance
LN-9270-12.3 76
MAINTENANCE DISASSEMBLY PROCEDURES
Step 18
Remove the Turbine (no tool required).
Pull straight off.
The Turbine sealed with a O-ring and
may be difficult to remove.
Step 19
Note the alignment marks.
Step 20
Note: Two (2) locating pins are
mounted on the back of the Turbine
to insure proper alignment.
When assembling these pins will eas-
ily insert when the alignment marks
are properly matched.
N O T E