Aerobell 168 - maintenance – Ransburg Aerobell 168 A12787 User Manual
Page 87
Advertising
Aerobell 168 - Maintenance
LN-9270-12.3
84
MAINTENANCE DISASSEMBLY PROCEDURES
(For Robot/Machine Mount Kits)
Step 11
Step 12
To remove the Microvalve As-
sembly, use the Microvalve Re-
moval Tool (A11922-00). Notice
the small threaded shaft protrud-
ing from the tool and the four (4)
locating pins.
Microvalve Assembly.
Microvalve Removal Tool
A11922-00
Threaded Shaft
Locating Pin
Align and insert the four (4) lo-
cating pins on the Microvalve
Removal Tool into the Mi-
crovalve Assembly four (4)
holes. Secure the Microvalve
Removal Tool by hand tighten-
ing the threaded shaft at the
knurled end of the tool.
Advertising