Aerobell 168 - maintenance – Ransburg Aerobell 168 A12787 User Manual
Page 85
Advertising
Aerobell 168 - Maintenance
LN-9270-12.3
82
MAINTENANCE DISASSEMBLY PROCEDURES
(For Robot/Machine Mount Kits)
Step 5
Remove the plastic SHCS from
the Mounting Manifold using the
5/16” (8mm) Hex Key Wrench .
Step 6
This is how the Robot/Machine
Mount should look at this point.
Step 7
Remove the plastic SHCS from
the Mounting Yoke using the
3/8” Hex Key Wrench .
Advertising