Ransburg Aerobell 168 A12787 - Manual (Page 83)

Aerobell 168 - Maintenance
LN-9270-12.3 80
MAINTENANCE DISASSEMBLY PROCEDURES
(For Robot/Machine Mount Kits)
Step 1
Step 2
Release the Fluid Coil (as
shown) from the Rear Manifold
using the Adjustable Wrench.
Using A11373-00 Tubing Re-
moval Tool push downward on
the outer ring of the push-on fit-
ting.
At the same time pull upward on
the plastic tubing.
Remove all such plastic tubing
from the Rear Manifold.