Ransburg Aerobell 168 A12787 - Manual (Page 70)

Aerobell 168 - Maintenance
67 LN-9270-12.3
MAINTENANCE DISASSEMBLY PROCEDURES
(30mm Bell Cup and Shape Air Ring)
Step 12
Step 13
Note:
To continue the process of
disassembly procedures of
the Aerobell 168 go to Step
14 on page 72
30mm Bell Cup
Splash Plate
A11388-00 Splash Plate
Removal Tool
To reassemble the Splash
Plate, place the Bell Cup with
the back down on a flat sur-
face and insert the Splash
Plate into the Bell Cup hole.
Using the large end of
A11388-00 Splash Plate Re-
moval Tool gently push into
position. Until an audible
“click” is heard.