LEESON SM-Plus Series Sub-Micro Inverters User Manual
Page 32
28
14.0
PARAMETER MENU
FACTORY
NO.
PARAMETER NAME
RANGE OF ADJUSTMENT
DEFAULT
(NOTE 1)
01
LINE VOLTAGE
HIGH (01), LOW (02)
HIGH (01)
02
CARRIER FREQUENCY
4kHz (01), 6kHz (02), 8kHz (03), 10 kHz (04)
6 kHz (02)
03
START METHOD
NORMAL (01), START ON POWER UP (02),
NORMAL (01)
START WITH DC BRAKE (03),
AUTO RESTART WITH DC BRAKE (04),
FLYING RESTART 1 (05,) FLYING RESTART 2 (06),
FLYING RESTART 3 (07)
04
STOP METHOD
COAST (01), COAST WITH DC BRAKE (02),
COAST (01)
RAMP (03), RAMP WITH DC BRAKE (04)
05
STANDARD SPEED
KEYPAD (01), PRESET #1 (02),
KEYPAD (01)
SOURCE
0-10 VDC (03), 4-20 mA (04)
06
TB-14 OUTPUT
NONE (01), RUN (02) ,FAULT (03),
NONE (01)
13
TB-15 OUTPUT
INVERSE FAULT (04), FAULT LOCKOUT (05),
NONE (01)
AT SET SPEED (06), ABOVE PRESET #3 (07),
CURRENT LIMIT (08), AUTO SPEED (09),
REVERSE (10)
08
TB-30 OUTPUT
NONE (01), 0-10 VDC FREQ (02),
NONE (01)
2-10 VDC FREQ (03), 0-10 VDC LOAD (04),
2-10 VDC LOAD (05)
09
TB-31 OUTPUT
NONE (01), 0-10 VDC LOAD (02),
NONE (01)
2-10 VDC LOAD (03), DYNAMIC BRAKING (04)
10
TB-13A FUNCTION
NONE (01), 0-10 VDC(02), 4-20mA (03),
NONE (01)
SELECT
PRESET SPEED #1 (04), RUN REVERSE (05),
START REVERSE (06), EXTERNAL FAULT (07),
REMOTE KEYPAD (08), DB FAULT (09),
AUXILIARY STOP (10), ACCEL/DECEL #2 (11)
11
TB-13B FUNCTION
NONE (01), 0-10 VDC (02), 4-20mA (03),
NONE (01)
SELECT
PRESET SPEED #2 (04), DECREASE FREQ (05),
JOG FORWARD (06), JOG REVERSE (07),
AUXILIARY STOP (08)
NOTE 1: Factory defaults are shown for a 60 Hz base frequency. See Parameter 48 for 50 Hz base
frequency.