TREND NX Variable Speed Drives - Manual (Page 102)

CONTROL KEYPAD vacon • 85
24-hour support +358 (0)40 837 1150 • Email: [email protected]
7
7.3.6 System menu (M6)
The System menu can be entered from the main menu by pushing the Menu button right when the location
indication M6 is visible on the display.
The controls associated with the general use of the frequency converter, such as application selection,
customised parameter sets or information about the hardware and software are located under the
System
menu . The number of submenus and subpages is shown with the symbol S (or P) on the value line .
On page 85 you will find a list of the functions available in the System menu.
Functions in the System menu
Code Function Min Max Unit Default Cust Selections
S6.1
Language
selection
English
Available selections depend
on the language package.
S6.2
Application
selection
Basic
Application
Basic Application
Standard Application
Local/Remote control Appl.
Multi-Step Application
PID Control Application
Multi-Purpose Control Appl.
Pump and Fan Control Appl.
S6.3 Copy parameters
S6.3.1 Parameter sets
Store set 1
Load set 1
Store set 2
Load set 2
Load factory defaults
S6.3.2 Load up to keypad All parameters
S6.3.3
Load down from
keypad
All parameters
All but motor parameters
Application parameters
P6.3.4 Parameter backup Yes
Yes
No
S6.4
Compare
parameters
S6.4.1 Set1 Not used
S6.4.2 Set2 Not used
S6.4.3 Factory settings
S6.4.4 Keypad set
S6.5 Security
S6.5.1 Password Not used 0=Not used
P6.5.2 Parameter lock
Change
Enabled
Change Enabled
Change Disabled
S6.5.3 Start-up wizard
No
Yes
S6.5.4
Multimonitoring
items
Change Enabled
Change Disabled
S6.6 Keypad settings
P6.6.1 Default page
P6.6.2
Default page/
Operating menu
P6.6.3 Timeout time 0 65535 s 30
P6.6.4 Contrast 0 31 18
P6.6.5 Backlight time Always 65535 min 10
S6.7 Hardware settings
P6.7.1
Internal brake
resistor
Connected
Not connected
Connected