TREND NX Variable Speed Drives - Manual (Page 87)

70 • vacon CONTROL KEYPAD
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
7
7.3 Navigation on the control keypad
The data on the control keypad are arranged in menus and submenus. The menus are used for example for
the display and editing of measurement and control signals, parameter settings (chapter 7.3.2), reference
values and fault displays (chapter 7.3.4). Through the menus, you can also adjust the contrast of the display
(page 94).
The first menu level consists of menus M1 to M7 and is called the
Main menu . The user can navigate in the
main menu using the Browser buttons up and down. The desired submenu can be entered from the main
menu using the Menu buttons . When there still are pages to enter under the currently displayed menu or
page, you can see an arrow ( ) in the lower right corner of the display and by pressing the Menu button
right , you can reach the next menu level.
The control keypad navigation chart is shown on the next page. Please note that the menu
M1 is located in
the lower left corner. From there you will be able to navigate your way up to the desired menu using the
menu and browser buttons.
More detailed descriptions of the menus you will find later in this Chapter.
V1 V14
READY
Local
RUN
Monitor
Location
Description
Number of items
available; Item value