TREND NX Variable Speed Drives - Manual (Page 127)

Basic Application vacon • 9
24-hour support +358 (0)40 837 1150 • Email: [email protected] 1
1.4 Basic Application – Parameter lists
On the next pages you will find the lists of parameters within the respective parameter groups. The
parameter descriptions are given on pages 124 to 211 of the NX Application Manual.
Column explanations:
Code
= Location indication on the keypad; Shows the operator the present parameter
number
Parameter = Name of parameter
Min = Minimum value of parameter
Max = Maximum value of parameter
Unit = Unit of parameter value; Given if available
Default = Value preset by factory
Cust = Customer’s own setting
ID = ID number of the parameter
= Parameter value can only be changed after the frequency converter has been
stopped.
1.4.1
Monitoring values (Control keypad: menu M1)
The monitoring values are the actual values of parameters and signals as well as statuses and
measurements. Monitoring values cannot be edited.
See the product's User's Manual (Trend Installation Manual Part3) for more information.
Code Parameter Unit ID Description
V1.1 Output frequency Hz 1 Output frequency to motor
V1.2 Frequency reference
Hz 25 Frequency reference to
motor control
V1.3 Motor speed rpm 2 Motor speed in rpm
V1.4 Motor current A 3
V1.5 Motor torque % 4 Calculated shaft torque
V1.6 Motor power % 5 Motor shaft power
V1.7 Motor voltage V 6
V1.8 DC link voltage V 7
V1.9 Unit temperature ° C 8 Heatsink temperature
V1.10 Motor temperature % 9
Calculated motor
temperature
V1.11 Voltage input V 13 AI1
V1.12 Current input mA 14 AI2
V1.13 DIN1, DIN2, DIN3 15 Digital input statuses
V1.14 DIN4, DIN5, DIN6 16 Digital input statuses
V1.15 DO1, RO1, RO2 17
Digital and relay output
statuses
V1.16 Analogue I
out
mA 26 AO1
M1.17 Multimonitoring items
Displays three
selectable monitoring
values
Table 1-2. Monitoring values