A1 a7, Nxfiff01, Applications basic – TREND NX Variable Speed Drives User Manual

Page 115: Application id, D1 d3

Advertising
background image

98 • vacon

CONTROL KEYPAD

Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205

7

Applications (S6.8.4)

At location S6.8.4 you can find the

Applications submenu

containing information about not only the

application currently in use but also all other applications loaded into the frequency converter. The
information available is:

Page Content

6.8.4.#

Name of application

6.8.4.#.1 Application

ID

6.8.4.#.2 Version
6.8.4.#.3 Firmware

interface

Table 7-10. Applications information pages

Figure 7-25. Applications info page

In the

Applications

information page, push the

Menu button right

to enter the Application pages of which

there are as many as there are applications loaded into the frequency converter. Locate the application you
want information about with the

Browser buttons

and then enter the

Information pages

with the

Menu

button right

. Use again the

Browser buttons

to see the different pages.

Hardware (S6.8.5)

The

Hardware

information page provides information on the following hardware-related topics:

Page Content

6.8.5.1

Power unit type code

6.8.5.2

Nominal voltage of the unit

6.8.5.3 Brake

chopper

6.8.5.4 Brake

resistor

Table 7-11. Hardware information pages

Expander boards (S6.8.6)

In the

Expander boards

pages you find information about the basic and option boards connected to the

control board (see Chapter 6.2).

You can check the status of each board slot by entering the

Expander boards

page with the

Menu button

right

and using the

Browser buttons

to choose the board whose status you wish to check. Push the

Menu

button right

again to display the status of the board. The keypad will also display the program version of

the respective board when you push either one of the

Browser buttons

.

If no board is connected to the slot the text

'no board'

will be shown. If a board is connected to a slot but

the connection is somehow lost the text

'no conn.'

is displayed. See Chapter 6.2 and Figure 6-21 and 6-16

for more information.

A1 A7

I/Oterm

I/Oterm

D1

D3

I/Oterm

READY

READY

D1 D3

I/Oterm

READY

NXFIFF01

2.01

I/Oterm

Applications

Basic

Standard

Application id

Version

Advertising