TREND NX Variable Speed Drives - Manual (Page 109)

92 • vacon CONTROL KEYPAD
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
7
Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated the text
*locked* will appear on the display if you try to edit a parameter
value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pushing the
Menu button right . Use the Browser buttons to change the parameter
lock status. Accept the change with the Enter button or return to the previous level with the Menu button
left .
Figure 7-15. Parameter locking
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the frequency
converter. If selected active (default), the Start-up Wizard prompts the operator for the language and
application of his/her choice plus for the values for a set of parameters common to all applications as
well as for a set of application-dependent parameters.
Always accept the value with the Enter button , scroll options or change values with the Browser buttons
(up and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the Menu
button right once to reach the edit mode. Use the Browser buttons to set value Yes and confirm the
selection with the Enter button . If you want to deactivate the function follow the same procedure and give
the parameter value No .
Figure 7-16. Activation of Start-up wizard
S1 S9
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
READY
I/Oterm
P1 P4
System Menu Security
Parameter Lock
ChangeEnable
Parameter Lock
ChangeDisabl
Parameter Lock
ChangeEnable
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
enter
Startup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM