TREND NX Variable Speed Drives - Manual (Page 106)

CONTROL KEYPAD vacon • 89
24-hour support +358 (0)40 837 1150 • Email: [email protected]
7
Figure 7-11. Storing and loading of parameter sets
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the
To keypad page (S6.3.2) from the Parameter copy menu . Push the Menu button right to enter the
edit mode. Use the Browser buttons to select the option All parameters and press the Enter button . Wait
until 'OK' appears on the display.
Figure 7-12. Parameter copy to keypad
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided that the
drive is in STOP status.
Enter the
From keypad page (S6.3.3) from the Parameter copy menu . Push the Menu button right to enter
the edit mode. Use the Browser buttons to select either the option All parameters or Application
parameters and press the Enter button . Wait until 'OK' appears on the display.
The procedure to download the parameters from keypad to drive is similar to that of from drive to keypad.
See above.
READY READY
enter
READY READY
OK
Parameter sets
Select
Parameter sets
CANCEL
CONFIRM
Parameter sets
Wait...
Parameter sets
LoadFactDef
P1 P4
READY READY READY
enter
READY READY
Copy Parameters Up to keypad Up to keypad
Select
CANCEL
CONFIRM
Up to keypad
Wait...
Up to keypad
OK
All param.
CHANGE VALUE