TREND NX Variable Speed Drives - Manual (Page 104)

CONTROL KEYPAD vacon • 87
24-hour support +358 (0)40 837 1150 • Email: [email protected]
7
7.3.6.1 Language selection
The Vacon control keypad offers you the possibility to control the frequency converter through the keypad
in the language of your choice.
Locate the language selection page under the
System menu . Its location indication is S6.1. Press the Menu
button right once to enter the edit mode. As the name of the language starts to blink you are able to choose
another language for the keypad texts. Confirm the selection by pushing the Enter button The blinking
stops and all textual information on the keypad is presented in the language you chose.
You can return to the previous menu anytime by pushing the
Menu button left .
Figure 7-9. Selection of language
7.3.6.2 Application selection
The user can select the application desired by entering the Application selection page (S6.2) . This is done
by pushing the Menu button right when on the first page of the System menu . Change then the application
by pushing the Menu button right once again. The name of the application starts to blink. Now you can
browse through the applications with the Browser buttons and select another application with the Enter
button .
Changing application will reset all parameters. After application change, you will be asked if you want the
parameters of the new application to be uploaded to the keypad. If you wish this to happen push the
Enter
button Pushing any other button leaves the parameters of the previously used application saved in the
keypad. For more information, see Chapter 7.3.6.3.
For more information about the Application Package, see Vacon NX Application Manual.
System Menu
S1 S11
READY
I/Oterm
Language
English
READY
I/Oterm
Language
English
READY
I/Oterm
enter
READY
I/Oterm
Francais
Langue