TREND NX Variable Speed Drives - Manual (Page 110)

CONTROL KEYPAD vacon • 93
24-hour support +358 (0)40 837 1150 • Email: [email protected]
7
Multimonitoring items (P6.5.4)
Vacon alpha-numeric keypad features a display where you can monitor even three actual values at the
same time (see chapter 7.3.1 and chapter
Monitoring values in the manual of the application you are
using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to replace the
values monitored with other values. See below.
Figure 7-17. Enabling the change of multimonitoring items
7.3.6.6 Keypad settings
In the Keypad settings submenu under the System menu you can further customise your frequency
converter operator interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#) associated
with the keypad operation:
Figure 7-18. Keypad settings submenu
Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves as the Timeout time (see
below) has expired or as the power is switched on to the keypad.
If the
Default Page value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the Menu button right once to enter the edit mode. Change the number of the Main
menu with the Browser buttons . Pressing the Menu button right once again makes you able to edit the
number of the submenu/page. If the page you want to move to by default is at the third level repeat the
procedure. Confirm the new default page value with the
Enter button . You can return to the previous step
anytime by pushing the Menu button left .
Figure 7-19. Default page function
0.
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
0. 1.
enter
Default page
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
Default page Default page
CONFIRM CHANGE
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
Multimon. items
ChangeEnable
Multimon. items Multimon. items
ChangeEnable ChangeDisable
P1 P5
READY
I/Oterm
0.
READY
I/Oterm
Keypad settings Default page