XLT XD-9010B - Manual (Page 19)

19
Prepare the Oven for Lifting
1. Remove the two conveyor opening flaps and thumbscrews from the oven. Set them aside for
reinstallation later.
2. Install the lifting plates in place of the conveyor opening flaps using the same thumbscrews.
Oven Assembly
Conveyor
Opening Flap
Thumb
Screws
Conveyor
Opening Flap
Thumb
Screws
Right Hand
Lifting Plate
Thumb
Screws
Thumb
Screws
Left Hand
Lifting Plate
The Lifting Pipe hole, marked for the appropriate oven size, must be installed closest
to the control box.
NOTE
NOTE
If using an AVI Hood System, conveyor flaps are not needed.
Top of Oven
Top of Oven