XLT XD-9010B - Manual (Page 37)

37
Oven Cleaning
1. Remove and clean crumb trays, product stops, and conveyor opening flaps.
2. Hold the front panel in place while removing the four (4) front panel knobs. Then remove and
clean the front panel.
Crumb Tray
Product Stop
Conveyor
Opening
Flap
Front Panel Knob
NOTE
DO NOT immerse front panel as it contains insulation that could become saturated.
Opening the sandwich door will provide a grip location for removing the front panel.
Front panels can weigh up to 75 lbs. or 34 kg. Use caution when lifting.
CAUTION
TIP
Thumb Screws