1 analog crt graphics mode, 2 lvds interface, Figure 2-7: vga connector – IEI Integration WAFER-945GSE2 v1.03 User Manual
Page 30
Advertising
WAFER-945GSE2 User Manual
Page 13
2.4.3.1 Analog CRT Graphics Mode
The analog CRT bus is interfaced to an external DB-15 interface connector. The
connector is shown below.
Figure 2-7: VGA Connector
Some of the features of the CRT include:
Integrated
400-MHz
RAMDAC
Analog Monitor Support up to QXGA
Support for CRT Hot Plug
2.4.3.2 LVDS Interface
The LVDS interface is connected directly to one of the LVDS connectors on the board.
Advertising