IEI Integration WAFER-945GSE2 v1.03 - Manual (Page 54)

WAFER-945GSE2 User Manual
Page 37
The ATX power supply enable connector enables the WAFER-945GSE2 to be connected
to an ATX power supply. In default mode, the WAFER-945GSE2 can only use an AT
power supply. To enable an ATX power supply the AT Power Select jumper must also be
configured. Please refer to Chapter 3 for more details.
Figure 4-4: ATX Power Supply Enable Connector Location
PIN NO. DESCRIPTION
1 +5V Standby
2 GND
3 PS-ON
Table 4-4: ATX Power Supply Enable Connector Pinouts
4.3.3 Audio Connector (10-pin)
CN Label: AUDIO1
CN Type: 10-pin header
CN Location: See Figure 4-5
CN Pinouts: See Table 4-5
The 10-pin audio connector is connected to external audio devices including speakers and
microphones for the input and output of audio signals to and from the system.