5 chassis installation, 1 airflow, Hassis – IEI Integration WAFER-945GSE2 v1.03 User Manual
Page 85: Nstallation, Table 5-6: lvds voltage selection jumper settings, Figure 4-13, Cn pinouts
Advertising
WAFER-945GSE2 User Manual
Page 68
LCD Voltage Select
Description
Short 1-2
+3.3V LVDS
Default
Short 2-3
+5V LVDS
Table 5-6: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 5-7.
Figure 5-7: LVDS Voltage Selection Jumper Pinout Locations
5.5 Chassis Installation
5.5.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the WAFER-945GSE2 must have
air vents to allow cool air to move into the system and hot air to move
out.
The WAFER-945GSE2 must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual
Advertising