Figure 5-10: dual rs-232 cable installation – IEI Integration WAFER-945GSE2 v1.03 User Manual
Page 89
Advertising
WAFER-945GSE2 User Manual
Page 72
the connector can only be installed in one direction.
Figure 5-10: Dual RS-232 Cable Installation
Step 3:
Secure the connectors. Both single RS-232 connectors have two retention
screws that must be secured to a chassis or bracket.
Step 4:
Connect the serial device. Once the single RS-232 connectors are connected
to a chassis or bracket, a serial communications device can be connected to the
system.
Step 0:
Advertising