2 installation checklist, 2 unpacking, 3 cf card installation – IEI Integration WAFER-945GSE2 v1.03 User Manual
Page 77: 1 cf card installation, Npacking, Nstallation, Figure 4-9, Cn pinouts, Table 4-9, The cooling fan con
WAFER-945GSE2 User Manual
Page 60
5.1.2 Installation Checklist
The following checklist is provided to ensure the WAFER-945GSE2 is properly installed.
All the items in the packing list are present
A compatible memory module is properly inserted into the slot
The CF Type I or CF Type II card is properly installed into the CF socket
The jumpers have been properly configured
The WAFER-945GSE2 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o
SATA drives
o
Power supply
o
USB cable
o
Serial port cable
o
Keyboard and mouse cable
The following external peripheral devices are properly connected to the
chassis:
o
RS-232 serial communications device
o
VGA screen
o
USB devices
5.2 Unpacking
When the WAFER-945GSE2 is unpacked, please check all the unpacking list items listed
in Chapter 3 are indeed present. If any of the unpacking list items are not available please
contact the WAFER-945GSE2 vendor reseller/vendor where the WAFER-945GSE2 was
purchased or contact an IEI sales representative.
5.3 CF Card Installation
5.3.1 CF Card Installation
NOTE:
The WAFER-945GSE2 can support both CF Type I cards and CF Type