IEI Integration WAFER-945GSE2 v1.03 - Manual (Page 66)

WAFER-945GSE2 User Manual
Page 49
PIN NO. DESCRIPTION
1 Power Switch
2 GND
Table 4-16: Power Button Connector Pinouts
4.3.14 Reset Button Connector
CN Label: RESET1
CN Type: 2-pin wafer (1x2)
CN Location: See Figure 4-16
CN Pinouts: See Table 4-17
The reset button connector is connected to a reset switch on the system chassis to enable
users to reboot the system when the system is turned on.
Figure 4-16: Reset Button Connector Locations
PIN NO. DESCRIPTION
1 Reset Switch
2 GND
Table 4-17: Reset Button Connector Pinouts