IEI Integration WAFER-945GSE2 v1.03 - Manual (Page 78)

WAFER-945GSE2 User Manual
Page 61
II cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install a CF card (Type 1 or Type 2) onto the WAFER-945GSE2, please follow the
steps below:
Step 1: Locate the CF card socket. Place the WAFER-945GSE2 on an anti-static pad
with the solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-1. Step 0:
Figure 5-1: CF Card Installation