Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 49)

B-13 OPERATION B-13
TANDEM CRUISER™
PARAMETER DEFINITION
P.14 Reset Consumable Weight
Use this option to reset the initial weight of the consumable package. Press
the Right Button to reset the consumable weight. This option will only appear
with systems using Production Monitoring.
P.15 Cold-Inch Touch Sense Option
This option allows enabling or disabling touch sense when feeding wire for-
ward.
Disabled = Touch sensing is disabled when feeding the wire forward
(default).
Enabled = Touch sensing is active when feeding the wire forward.
When enabled and feeding wire forward, the wire is electrically "hot" and
waiting to short to the plate. When a short occurs, the wire feed automatical-
ly stops and the flux hopper relay is activated until the feed forward button is
released.
P.21 Shutdown 2 Function Select
This option allows selection of the Shutdown 2 input function on the control
box.
Normal Shutdown = The Shutdown 2 input functions as a standard shutdown
input that locks out all input buttons (default)
Output Disable = The Shutdown 2 input functions as a machine output lock-
out to disable the welding circuit but still allow cold feeding of the wire.
Trigger Fan-Out
For Sub-Arc Lead Arc machines only. Allows the Lead Arc User Interface to
control all machine triggers in a multi-arc system.
No = Only the machine connected to the User Interface can be triggered on
and off (default).
Yes = All machines in the system can be triggered on and off simultaneous-
ly.
P.18 Wire Drive Gear Ratio.
This option selects the Wire Drive Gear Ratio that will be used. The possible
selectable values are read from the Wire Drive on startup. For semi-automat-
ic systems, if the feedhead board has dip switches, this option does not
appear in the menu. Gear ratio can be selected using the dip switches.
Note: Changing this value will cause the system to reset.
P.19 Wire Drive Direction
This option selects the direction that the Wire Drive will run in. This option is
useful since the Tractor's WD head can be rotated to "point" in different direc-
tions.
P.23