Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 57)

E-3 TROUBLESHOOTING E-3
TANDEM CRUISER™
Observe all Safety Guidelines detailed throughout this manual
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local
Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
RECOMMENDED
COURSE OF ACTION
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
When the welding arc is activated,
the drive rolls spin but no arc is pre-
sent. 1. Check all electrode and work
connections.
The wire drive feeds wire in the
wrong direction.
The wire drive speed is incorrect.
1. Change P19 wire feed direction
parameter in the Set-Up menu.
1. Verify the gear ratio of the wire
drive and P18 match.