Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 51)

B-15 OPERATION B-15
TANDEM CRUISER™
PARAMETER DEFINITION
P.105 Welding Software
Used for viewing the Weld Set in the Power Source. Press the Right Button
to read the Weld Set version. Press the Left Button to back out and exit this
option.
P.106 Ethernet IP Address
Used for viewing the IP address of Ethernet compatible equipment. Press the
Right Button to read the IP Address. Press the Left Button to back out and
exit this option. The IP address cannot be changed using this option.
P.107 Power Source
Used for viewing the type of power source the feeder is connected to. Press
the Right Button to identify the power source as either LincNet or ArcLink.
Press the Left Button to back out and exit this option.
P.500 View Lockout Parameters
Originally used to prevent inadvertent changes of secure setup parameters,
P.500 was previously used as a gateway to these parameters. Presently, this
option does not exist in any setup menu.