Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 37)

B-1 OPERATION B-1
SAFETY PRECAUTIONS
The serviceability of a product or structure utilizing
the welding programs is and must be the sole
responsibility of the builder / user. Many variables
beyond the control of The Lincoln Electric
Company affect the results obtained in applying
these programs. These variables include, but are
not limited to, welding procedure, plate chemistry
and temperature, weldment design, fabrication
methods and service requirements. The available
range of a welding program may not be suitable for
all applications, and the build / user is and must be
solely responsible for welding program selection.
PRODUCT DESCRIPTION
The TANDEM CRUISER™ is designed to weld with
both the lead and trail arcs. If desired, only the lead
arc may be used. It can also be used with just the trail
arc when using MANUAL travel.
By default, the lead and trail arc are triggered indepen-
dently. Change P23 through the set-up menu to have
both arcs trigger from the lead start and stop buttons.
Operation of the lead and trail arc is similar.
Differences are:
• No travel commands for the trail arc.
• The lead arc has 4 memories, the trail arc has 8
memories.
TANDEM CRUISER™
ELECTRIC SHOCK can kill.
• Turn the input power OFF at
the disconnect switch before
working on this equipment.
• Do not touch electrically hot parts.
• Only qualified personnel should install, use or
service this equipment.
• Do not allow parts at electrode potential to touch
the tractor frame, cress slides, base flux hopper
or other parts.
• Disengaging the clutch does not stop the weld-
ing arc.
• Always wear dry insulating gloves.
------------------------------------------------------------------------
WARNING
MOVING PARTS can injure.
• Do not leave the tractor unat-
tended while it is welding or
traveling.
• Electrode reel, drive rolls and wire straightener
rolls turn during welding or inching.
• Keep gloved hands away from rotating parts.
• Keep away from pinch points.
• Do not place the tractor on inclined surfaces with
the clutch disengaged.
WARNING
Wire Feed
GRAPHIC SYMBOLS
• Only qualified personnel should install, use or
service this equipment.
------------------------------------------------------------------------