Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 14)

A-7 INSTALLATION
TANDEM CRUISER™
A-7
BUTT JOINT GUIDE, 2 WHEEL
(See Figure A.7)
Remove the butt joint guide assembly as shipped
from the factory. Loosen the clamp bolts on the
clamp holding the pendant tube. Slide the butt joint
guide out and set aside
Then slide the pendant tube until it is flush with the
end of the clamp. Retighten the clamp bolts.
(See Figure A.8)
FIGURE A.7
FIGURE A.8