Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 46)

B-10 OPERATION B-10
SETUP will light and the MSP4 displays the following:
Press the left MSP4 button (YES) to enable limits or
the right MSP4 button (NO) to disable limits. Disabling
limits does not change any limits values that may have
been previously set.
TANDEM CRUISER™
FIGURE B.24 - ENABLE/DISABLE LIMITS
DISPLAY
1 2 3 4 5 6 7 8
ON
OFF
8 7 6 5 4 3 2
1
OFF
ON
1 2
3
4 5
6 7 8
ON
OFF
DIP SWITCHES
The DIP switches on the pc boards are set at the factory and do not require adjustment.
Travel Board DIP Switches Lead Wire Drive Board DIP Switches
All the DIP switches are in the OFF position. All the DIP switches are in the OFF position.
Trail Wire Drive Board DIP Switches
All the DIP switches are in the OFF position.