Installation – Lincoln Electric IM10114 TANDEM CRUISER User Manual
Page 10
A-3
INSTALLATION
TANDEM CRUISER™
A-3
PARTS INCLUDED WITH THE TANDEM CRUISER
™
Description
Flux Tube
Conduit Tubing
Wire Reel Enclosure
Strain Relief Boot
Insulating Tube
Nozzle Adapter
Nozzle Extension
Nozzle Extension, 45° curved
Nozzle Tip
Flux Hose Clamp
Nozzle Insulator
Flux Cone Nozzle Assembly
5/16-18 x 1.00 Bolt
5/16 Lock Washers
5/16 Flat Washers
5/16-18 x 2.50 Bolt
Purpose
Connects from the bottom of the flux hopper to the
concentric cone flux nozzle.
Used for routing the electrode from the inlet bushing
to the wire drive. Trim the length as needed.
Keeps the coils of electrode dry when the Cruiser is
stored in wet conditions.
Covers the brass fitting of the wire reel enclosure to
keep water out.
Used as connectors for joining the rubber flux tubes
together.
Extends the nozzle 3.00”.
Makes the nozzle longer.
Frequently used when making horizontal fillet welds.
Contact tips for 5/32 wire.
Supports the rubber flux tube along the nozzle.
Covers the nozzle or nozzle extensions to reduce
the potential of contact.
These parts assemble together to direct the flux
around the electrode.
Used when assembling the Tandem Cruiser
™
in the
flat fillet position.
Part No.
T10642-10
S20023-5
G3674-1
S24669-1
M17225
T7028-245
M13739-1
KP2721-1
KP2721-2
S10125-5/32
T12929
T11807
M8249
T9078-1
S10147
T10575-1
T10574
S24739-20
E106A-3
S9262-121
CF000173
Qty.
3
2
2
2
2
3
2*
2
2
2
2
2
1
1
1
1
1
16
4
*
(one shipped loose, one assembled to the trail arc)