Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 48)

B-12 OPERATION B-12
TANDEM CRUISER™
PARAMETER DEFINITION
P.12
Tractor Wheel Size
Press the Right Button to enter the option and rotate the Control Knob to select
Wheel Size. Press the Right Button to enter the selected option. Rotate the
Control Knob to select the desired value. After selecting the value, press the
Left Button to save the value and back out to select another option. Rotate the
Control Knob to make another selection, or press the Left Button to exit this
option. When the value is set to 5.65 ipm, the display will read "Track" indi-
cating the track wheels are being used.
Tractor Travel Speed
Press the Right Button to enter the option and rotate the Control Knob to select
Travel Speed. Press the Right Button to enter the selected option. Rotate the
Control Knob to select the desired value. After selecting the value, press the
Left Button to save the value and back out to select another option. Rotate the
Control Knob to make another selection, or press the Left Button to exit this
option.
Travel Carriage Start/Stop - Travel Starts
This option allows the adjustment of the start and end travel options for a trav-
el carriage. Press the Right Button to enter the option and rotate the Control
Knob to select either starting or ending options. Press the Right Button to enter
the selected option. Rotate the Control Knob to select the desired function.
After selecting the function, press the Left Button to save the function and back
out to select another option. Rotate the Control Knob to make another selec-
tion, or press the Left Button to exit this option.
Travel Carriage Start/Stop - Travel Ends
This option allows the adjustment of the start and end travel options for a trav-
el carriage. Press the Right Button to enter the option and rotate the Control
Knob to select either starting or ending options. Press the Right Button to enter
the selected option. Rotate the Control Knob to select the desired function.
After selecting the function, press the Left Button to save the function and back
out to select another option. Rotate the Control Knob to make another selec-
tion, or press the Left Button to exit this option.