Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 122)

Chapter 4 Specifications
4-57
‹AGP-3500L/AGP-3500S
Unit:mm[in.]
• Depending on the type of connection cable used the dimensions shown above will
change. The dimensions given here are representative values and are intended for
reference only.
AUX Connector
Rear
Bottom
26
[1
.0
2]
11
[0
.4
3
]
DIO
Connector,
FLEX
NETWORK
Connector or
CANopen
Connector
The DC type unit has the
power supply terminals
shown above.
(The figure shows the DIO board type unit.)
Left side Right side
28 [1.10]
59[2.32]
8.4[0.33]
30[1.18
]
12.7[0.50]
10[0.39]
AUX
Connector
*1 A 20 mm-space is necessary for the DIO/FLEX NETWORK board and a 127 mm-space for the
CANopen board type.
*1