Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 81)

GP3000 Series Hardware Manual
4-16
‹AGP-3310T/3360T
AGP-3310T AGP-3360T
Internal Memory *1
*1 User active capacity.
FLASH EPROM 8MB
Backup Data
SRAM 320KB
Use lithium battery for backup memory
In
terface
Serial Interface
COM1: RS232C/RS422/RS485
Asynchronous Transmission:
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed: 2400bps to 115.2 kbps
Connector: D-Sub 9-pin plug
COM2: RS422/RS485
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed: 2400 bps to 115.2 kbps
187.5 kbps (MPI)
Connector: D-Sub 9-pin socket
Ethernet Interface
Ethernet (IEEE802.3u,10BASE-T/100BASE-TX)
Connector: modular jack connector (RJ-45)
Expansion Unit
Interface
Connects the communication unit
USB Host
Interface
Conforms to USB1.1.(TYPE-A conn.) x 2
Power Supply Voltage: DC5V
±
5%
Output Current: 500mA(max.)
Communication Distance:5m(max.)
CF Card Interface Compact Flash CF Card Slot (TYPE-II)
Video Input
Interface
–
NTSC: 59.9Hz
PAL: 50Hz
Connector: RCA 75W
Sound Input
Interface
–
MIC input/LINE input
(Change with S/W)
Connector: MINI-JACK F3.5
Speaker Output
Interface
Speaker output: 70mW (8
Ω rated load) Connector: MINI-JACK φ3.5
Clock Accuracy
*2
*2 The GP’s internal clock has a slight error. At normal operating temperatures and conditions,
with the GP operating from its lithium battery, the degree of error is 65 seconds per month.
Variations in operating conditions and battery life can cause this error to vary from -380 to
+90 seconds per month. For systems where this degree of error will be a problem, the user
should be sure to monitor this error and make adjustments when required.
±
65 seconds/ month (at room temperature)
Control
Memory
Variable Area 64KB SRAM (uses lithium battery)
Program Area 132KB FLASH EPROM