Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 28
Chapter 1 System Design
1-7
Edit Mode Peripherals
*1
For supported models, refer to Pro-face’s support site “Otasuke Pro!” (http://www.pro-face.com/
otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu-[Connect to Support Site
“Otasuke Pro!” (C)] command.
*2
The RS-232C Isolation Unit does not correspond to RS-422/485 (2 wire) communication.
*3
The RS-232C Isolation Unit does not correspond to Serial Multilink communication.
*4
For details regarding connection methods, be sure to read “Transferring Projects and Data” under
“COM Transfer Connections” in the GP-Pro EX Reference Manual.
*5
Certain types and models of PCs cannot be used.
GP Interfaces
(1)Ethernet Interface
(10BASE-T/100BASE-TX)
Not available with AGP-3301* units
(2)USB Host Interface
(3)CF Card Interface
Not available with GP-3200 series
SEE
GP-Pro EX Reference Manual
USB Transfer Cable
CA3-USBCB-01
USB Port
Personal Computer
(Commercial type)
*5
Screen Editor
Software
GP-Pro EX
To an Ethernet Network
GP Unit
CF Card CA3-CFCALL/128MB-01
CA3-CFCALL/256MB-01
CA3-CFCALL/512MB-01
CA6-CFCALL/1GB-01
CA8-CFCALL/2GB-01
CF Card Adapter
GP077-CFAD10
PCMCIA Slot
(3)
(2)
(1)
USB Memory Strage
*1
(Commercial type)
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01
RS-232C Cable
*4
(Prepared by user)
Modem
*1
(Commercial type)
Serial Port
Telephone lines