Cable attached dimensions – Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 91

Advertising
background image

GP3000 Series Hardware Manual

4-26

„ Cable Attached Dimensions

GP-3300 dimensions with cable connected differ between AGP-3300*/3301*/3302 and AGP-3310T/3360T.

‹AGP-3300*/3301*/3302*

Unit: mm[in.]

• All the above values are designed in case of cable bending. The dimensions given

here are representative values depending on the type of connection cable used.

Therefore, they are all intended for reference only.

Front

29

[1.14]

Rear

Right side

13

[0.51]

24

[0.94]

Left side

AGP-3301

∗/3302B

Series units are not
equipped with an
Ethernet interface.

*1

DIO Connector,
FLEX NETWORK
Connector or
CANopen
Connector

Bottom

(The figure shows the DIO board type unit.)

*1

A 20mm [0.79 in.] space is necessary for the DIO/FLEX NETWORK board and a 127mm [5 in.] space for
the CANopen board type.

Advertising
This manual is related to the following products:

AGP3400 - 7.5 DIO HMI", AGP3300 - 5.7 DIO HMI", AGP3600 - 12.1 FLEX Network HMIs", AGP3500 - 10.4 FLEX Network HMI", AGP3400 - 7.5 FLEX Network HMI", AGP3600 - 12.1 CANopen HMI", AGP3500 - 10.4 CANopen HMI", AGP3400 - 7.5 CANOpen HMI", AGP3300 - 5.7 CANopen HMI", AGP3300H - 5.7 Handheld HMIs", AGP3750 - 15 Multi-Media HMI", AGP3650 - 12.1 Multi-Media HMIs", AGP3550 - 10.4 Multi-Media HMIs", AGP3450 - 7.5 Multi-Media HMI", AGP3360 - 5.7 Multi-Media HMI", AST3300 - 5.7 Basic HMI", AST3200 - 3.8 Basic HMI", AGP3600 - 12.1 Standard HMIs", AGP3500 - 10.4 Standard HMIs", AGP3400 - 7.5 Standard HMI", AGP3300 - 5.7 Standard HMI", AGP3200 - 3.8 Standard HMI"

Popular Brands
Popular manuals