Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 176)

Chapter 8 Installation and Wiring
8-5
„Installing the GP
(1) Insert the GP into the panel cut, as shown.
(2) Insert the installation fasteners into the GP
insertion slots, at the left-and-right or top-
and-bottom of the unit. (total: 4 slots).Only
the AGP-3750T has 8 slot locations.
• Insert each installation fastener securely into the slot’s recess (shaded area).
Installation Panel
Hook
The following shows the insertion
slots location that are on both left and
right sides. (GP-3200 Series)
The following shows the insertion
slots location that are on the top and
bottom sides. (GP-3300 Series)
Slots Slots
Left Right
left and right
top and bottom