Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 218

Advertising
background image

Chapter 9 Maintenance

9-9

(6)

Disconnect the Backlight Unit cable from the connector on the inverter board, and then remove the cable

from the cable clamp.

(7)

Remove the hook from the Backlight Unit.

(8)

Remove the Backlight Unit while sliding it along the groove.

Connector

Cable Clamp

Cable

Hook

Backlight Unit

Advertising
This manual is related to the following products:

AGP3400 - 7.5 DIO HMI", AGP3300 - 5.7 DIO HMI", AGP3600 - 12.1 FLEX Network HMIs", AGP3500 - 10.4 FLEX Network HMI", AGP3400 - 7.5 FLEX Network HMI", AGP3600 - 12.1 CANopen HMI", AGP3500 - 10.4 CANopen HMI", AGP3400 - 7.5 CANOpen HMI", AGP3300 - 5.7 CANopen HMI", AGP3300H - 5.7 Handheld HMIs", AGP3750 - 15 Multi-Media HMI", AGP3650 - 12.1 Multi-Media HMIs", AGP3550 - 10.4 Multi-Media HMIs", AGP3450 - 7.5 Multi-Media HMI", AGP3360 - 5.7 Multi-Media HMI", AST3300 - 5.7 Basic HMI", AST3200 - 3.8 Basic HMI", AGP3600 - 12.1 Standard HMIs", AGP3500 - 10.4 Standard HMIs", AGP3400 - 7.5 Standard HMI", AGP3300 - 5.7 Standard HMI", AGP3200 - 3.8 Standard HMI"

Popular Brands
Popular manuals