Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 60)

Chapter 3 Part Names and Functions
3-15
G: Ethernet Interface (LAN)
The Ethernet transmission interface (10BASE-T/
100BASE-TX). An RJ-45 type modular jack
connector (8-pole) is used. The LED turns on or off
to indicate the current status.
H: USB Host Interface (USB) (X2)
Complies with USB 1.1. Uses a “ TYPE-A”
connector. Power supply voltage: 5VDC
±
5%,
Output current: 500mA(max). The maximum
communication distance : 5m.
I: Expansion Unit Interface 1
Connects expansion units with communication
features.
J: VM Unit Interface
The interface which connects the expansion unit
which is a kind of Display manufactured by Pro-
face.
K: Auxiliary input/output /Voice Output Interface (AUX)
This interface is External Reset, Alarm Output, Buzzer Output, and sound output.
L: Function Expansion Memory Interface Cover
Remove the cover. This is the interface for inserting the function expansion memory that expands Pro-face’s
Screen Editor’s alarm and text table function.
M: CF Card Access LED
This lamp light up when CF card is inserted and CF card cover is closed. However, opening the CF card
cover, in the CF card while accessing it continues to light up.
LED Indicates
Green ON Data transmission available
Green OFF
No connection or
subsequent transmission
failure
Yellow ON
Data transmission is
occurring.
Yellow OFF No data transmission
Access Lamp Indicates
Green ON
The CF Card is inserted
and the CF Card Cover
is closed. Or, the CF
Card is being accessed.
Green OFF
The CF Card is not
inserted or is not being
accessed.
• Do not remove or insert the CF Card when the LED lamp is on. Doing so may damage data on
the CF Card.
R N O P S Q
T
I J
K
S R N O
M
L
Back
Bottom
Q