Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 58)

Chapter 3 Part Names and Functions
3-13
T: Dip Switches1
Dip
Switches
Function ON OFF Note
1
CF Card Startup Settings
(Controls unit startup from
the CF Card.)
Startup from CF
Card is enabled. Startup from CF
Card is disabled. CF Card with startup
data required.
2
*1
*1 When power supply is turned ON at dip switch 2 is ON, it starts with Transfer Mode.
Usually, use it in OFF.
Forced Transfer Mode
Forced Transfer
Mode: ON Forced Transfer
Mode: OFF
-
3 Booking - - Constantly OFF
4
This setting controls the
forced closing of the CF
Card cover.
Forced close
enabled. Forced close
disabled. Used when CF Card
cover is damaged.
1 2 3 4
ON