Inspecting printer parts – AMT Datasouth ACCEL-6300 User Manual
Page 115
User's Guide
5-8 Cleaning and Maintenance
Inspecting Printer Parts
You should occasionally inspect printer components so you can prevent
problems before they occur. If some component appears to be damaged
or worn, contact your service representative for a replacement part.
,Caution: Before starting your inspection, be sure to turn off the
printer.
Figure 5-8. Inspecting the Printer, Front
PLATEN
The surface should be dull--not shiny.
Look for dents or flaws in the rubber
surface.
BAIL AND BAIL ROLLERS
Look for stiffness or binding in move-
ment. Look for dents or flaws in the
rubber surface of the rollers.
PRINTHEAD
Look for bent wires or any visible
signs of wear.
CHASSIS
Look for obstructions in the carriage
path. Remove any dust, paper fibers,
or other foreign matter from inside
the printer.
PULLEYS AND DRIVE BELTS
Look for looseness or visible
damage.
RIBBON CARTRIDGE
Look for worn fabric.
User's Guide
5-8 Cleaning and Maintenance
Inspecting Printer Parts
You should occasionally inspect printer components so you can prevent
problems before they occur. If some component appears to be damaged
or worn, contact your service representative for a replacement part.
,Caution: Before starting your inspection, be sure to turn off the
printer.
Figure 5-8. Inspecting the Printer, Front
PLATEN
The surface should be dull--not shiny.
Look for dents or flaws in the rubber
surface.
BAIL AND BAIL ROLLERS
Look for stiffness or binding in move-
ment. Look for dents or flaws in the
rubber surface of the rollers.
PRINTHEAD
Look for bent wires or any visible
signs of wear.
CHASSIS
Look for obstructions in the carriage
path. Remove any dust, paper fibers,
or other foreign matter from inside
the printer.
PULLEYS AND DRIVE BELTS
Look for looseness or visible
damage.
RIBBON CARTRIDGE
Look for worn fabric.