AMT Datasouth ACCEL-6300 - Manual (Page 140)

User's Guide
Solving Problems 6-23
Checking Sensors and Switches—continued
To test the rear and bottom paper jam sensors,
turn the wheel on each sensor.
To test a control panel button, just press the
button and look for a confirmation message.
Pressing the Ready button terminates the test.
)Note: If you are unable to get a confirma-
tion message, the selected sensor or switch
is malfunctioning. Contact your Service
Representative for help.
To stop the test and return to the Setup menu,
press the Ready button.
Sensor: Rear Jam
Sensor: Bot Jam
Button: Setup
Button: Quality
Button: Font
Button: Test
Button: Clear
Button: Bail
Button: Alt
Button: PaprPark
Button: PaprPath
Button: LineFeed
Button: FormFeed
4) TEST: Sensor
User's Guide
Solving Problems 6-23
Checking Sensors and Switches—continued
To test the rear and bottom paper jam sensors,
turn the wheel on each sensor.
To test a control panel button, just press the
button and look for a confirmation message.
Pressing the Ready button terminates the test.
)Note: If you are unable to get a confirma-
tion message, the selected sensor or switch
is malfunctioning. Contact your Service
Representative for help.
To stop the test and return to the Setup menu,
press the Ready button.
Sensor: Rear Jam
Sensor: Bot Jam
Button: Setup
Button: Quality
Button: Font
Button: Test
Button: Clear
Button: Bail
Button: Alt
Button: PaprPark
Button: PaprPath
Button: LineFeed
Button: FormFeed
4) TEST: Sensor