AMT Datasouth ACCEL-6300 User Manual
Page 132
User's Guide
Solving Problems 6-15
Table 6-1. Troubleshooting Guide––continued
Symptom
Probable Cause/Corrective Action
Characters are missing one or
9
9
9
9
9 Print density fine-adjustment
more dots.
is set too light. Hold down
Print Density button and re-
adjust print density.
9
9
9
9
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.
9
9
9
9
9 Printhead is damaged or worn.
Replace printhead.
Printer prints garbled text and
9
9
9
9
9 Wrong printer emulation sel-
paper moves erratically.
ected. Make sure computer
and printer are set for same
printer emulation.
Single sheets do not feed properly. 9
9
9
9
9 Paper is not loaded properly.
Refer to Loading Paper section
for detailed procedure.
9
9
9
9
9 Wrong paper path selected.
Make sure Top paper path is
selected.
9
9
9
9
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.
User's Guide
Solving Problems 6-15
Table 6-1. Troubleshooting Guide––continued
Symptom
Probable Cause/Corrective Action
Characters are missing one or
9
9
9
9
9 Print density fine-adjustment
more dots.
is set too light. Hold down
Print Density button and re-
adjust print density.
9
9
9
9
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.
9
9
9
9
9 Printhead is damaged or worn.
Replace printhead.
Printer prints garbled text and
9
9
9
9
9 Wrong printer emulation sel-
paper moves erratically.
ected. Make sure computer
and printer are set for same
printer emulation.
Single sheets do not feed properly. 9
9
9
9
9 Paper is not loaded properly.
Refer to Loading Paper section
for detailed procedure.
9
9
9
9
9 Wrong paper path selected.
Make sure Top paper path is
selected.
9
9
9
9
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.