AMT Datasouth ACCEL-6300 - Manual (Page 50)

User's Guide
Loading Paper 3-5
Loading Single Sheets––continued
You can load single sheets with pin-feed paper already loaded, provided
that the pin-feed paper is in the parked position. You'll learn more about
paper park later in this section. With a sheetfeeder option, you can load
single sheets continually without operator intervention. For information on
installing and operating a sheetfeeder option, refer to the User's Guide
that came with the option.
Positioning a Single Sheet
If necessary, you can reposition a single sheet after loading it. To do so,
press the Ready button to disable printing. Then, turn the Select-dial
either clockwise to advance the sheet or counterclockwise to reverse
feed the sheet. Then, press the Ready button again to enable printing.
Ejecting a Single Sheet
The printer ejects a single sheet under any of the following conditions:
9 9 9 9 9 When instructed by your software application.
9 9 9 9 9 When printing reaches the last print line on the page.
9 9 9 9 9 When printing reaches the number of lines you or your software
application specified for a page.
9 9 9 9 9 When automatic form feeding is on and printing reaches a half-inch
from the bottom of the page.
9 9 9 9 9 When you press the Form Feed button on the control panel.
User's Guide
Loading Paper 3-5
Loading Single Sheets––continued
You can load single sheets with pin-feed paper already loaded, provided
that the pin-feed paper is in the parked position. You'll learn more about
paper park later in this section. With a sheetfeeder option, you can load
single sheets continually without operator intervention. For information on
installing and operating a sheetfeeder option, refer to the User's Guide
that came with the option.
Positioning a Single Sheet
If necessary, you can reposition a single sheet after loading it. To do so,
press the Ready button to disable printing. Then, turn the Select-dial
either clockwise to advance the sheet or counterclockwise to reverse
feed the sheet. Then, press the Ready button again to enable printing.
Ejecting a Single Sheet
The printer ejects a single sheet under any of the following conditions:
9 9 9 9 9 When instructed by your software application.
9 9 9 9 9 When printing reaches the last print line on the page.
9 9 9 9 9 When printing reaches the number of lines you or your software
application specified for a page.
9 9 9 9 9 When automatic form feeding is on and printing reaches a half-inch
from the bottom of the page.
9 9 9 9 9 When you press the Form Feed button on the control panel.