AMT Datasouth ACCEL-6300 - Manual (Page 54)

User's Guide
Loading Paper 3-9
Using the Demand Document Mode––continued
The printer automatically senses whether or not you tear off the page.
Pressing the Ready button again causes one of the following actions:
9 9 9 9 9 If you removed the last printed page, the paper reverse feeds to the
next top-of-form, the READY message reappears, and printing
continues.
9 9 9 9 9 If you did not remove the last printed page, the paper reverse feeds
to its original position, the READY message reappears, and printing
continues at the point where it left off.
Normally, the demand document mode is off. To turn on the demand
document mode, use the following procedure:
With the printer paused or idle, press the
Setup button on the control panel to access
the Setup menu.
Turn the Select-dial until the DEMAND
parameter appears on the display.
While holding down the Alt button, turn the
Select-dial until On appears. Then, release
the Alt button.
Press the Setup button again to return to the
status message display.
OPERATIONS
35) DEMAND: Off
35) DEMAND: On
COURIER LQ READY
User's Guide
Loading Paper 3-9
Using the Demand Document Mode––continued
The printer automatically senses whether or not you tear off the page.
Pressing the Ready button again causes one of the following actions:
9 9 9 9 9 If you removed the last printed page, the paper reverse feeds to the
next top-of-form, the READY message reappears, and printing
continues.
9 9 9 9 9 If you did not remove the last printed page, the paper reverse feeds
to its original position, the READY message reappears, and printing
continues at the point where it left off.
Normally, the demand document mode is off. To turn on the demand
document mode, use the following procedure:
With the printer paused or idle, press the
Setup button on the control panel to access
the Setup menu.
Turn the Select-dial until the DEMAND
parameter appears on the display.
While holding down the Alt button, turn the
Select-dial until On appears. Then, release
the Alt button.
Press the Setup button again to return to the
status message display.
OPERATIONS
35) DEMAND: Off
35) DEMAND: On
COURIER LQ READY