Watlow CLS200 - Manual (Page 24)

Chapter 1: System Overview CLS200 Series User’s Guide
8 Watlow Anafaze Doc.# 0600-3050-2000
Front Panel Description
The display and touch keypad provide an intelligent way to
operate the controller. The display has 16 alphanumeric or
graphic characters per line. The 8-key keypad allows you to
change the operating parameters, controller functions, and
displays.
The information-packed displays show process variables,
setpoints, and output levels for each loop. A bar graph dis-
play, single loop display, scanning display and an alarm
display offer a real-time view of process conditions. Two ac-
cess levels allow operator changes and supervisor changes.
Figure 1.4 CLS200 Front Panel
TB50
The TB50 is a screw-terminal interface for control wiring
which allows you to connect relays, encoders and discrete I/
O devices to the CLS200. The screw terminal blocks accept
wires as large as 18 AWG (0.75 mm 2 ). A 50-pin SCSI cable
connects the TB50 to the CLS200.
Figure 1.5 TB50
WATLOW ANAFAZE CLS200