Watlow CLS200 - Manual (Page 70)

Chapter 3: Using the CLS200 CLS200 Series User’s Guide
54 Watlow Anafaze Doc.# 0600-3050-2000
Press CHNG SP to change the loop setpoint
Press MAN/AUTO to:
• Toggle a loop between manual and automatic control
• Adjust the output power level of manual loops
• Automatically tune the loop
If your controller has the ramp/soak option, press RAMP/
SOAK to:
•
Assign a ramp/soak profile to the current loop
• Select the ramp/soak mode
• See the status of a running profile
Your controller may not have the ramp/soak option. If it
does not, pressing the
RAMP/SOAK key displays the message
OPTION UNAVAILABLE.
Press ALARM ACK to:
• Acknowledge an alarm condition
• Reset the global alarm output
CHNG
SP
MAN
AUTO
RAMP
SOAK
ALARM
ACK