Watlow CPC400 - Manual (Page 28)

Chapter 2: Installation CPC400 Series User’s Guide
14 Watlow Anafaze Doc. 0600-2900-2000
Figure 2.2 Clearance with Straight SCSI Cable (L) and Right-Angle SCSI Cable (R)
Figure 2.3 Wiring Clearances
We recommend you mount the controller in a panel not
more than 0.2 in. (5 mm) thick.
1. Choose a panel location free from excessive heat (more
than 50° C [122° F]), dust, and unauthorized handling.
(Make sure there is adequate clearance for the mount-
ing hardware, terminal blocks, and cables. The con-
troller extends 7.0 in. (178 mm) behind the panel.
1.0 in.
(25 mm)
7.0 in.
(178 mm)
1.6 in.
(41 mm)
1.0 in.
(25 mm)
7.0 in.
(178 mm)
0.6 in.
(15 mm)
3.63
±
0.020 in.
(92.2
±
0.5 mm)
1.80
±
0.020 in.
(45.7
±
0.5 mm)
Maximum Panel Thickness
0.2 in. (5 mm)