Yokogawa EJA440E - Manual (Page 78)

<4. Diagnostics>
4-31
IM 01C25T01-06EN
Integral
Indicator
HART configuration
tool display
Device Status
Extended
Device Status
Value and Status (Data Quality and Limit Status)
Differential
Pressure
(DP)
Static
Pressure
(SP)
Temperature
(T)
% range Loop current
AL.91
P. SIM
P Simulate Mode --- Device
Variable Alert
(0x02)
Value and
Status:
Pressure
simulation
value
Value: Measured value
Status: Good and Not
Limited
According to the setting of
simulation
AL.91
SP.SIM
SP Simulate
Mode
Value and
Status:
Static
Pressure
simulation
value
Value: Measured value
Status: Good and Not
Limited
AL.91
T.SIM
T Simulate Mode Value: Measured value
Status: Good and Not
Limited
Value and
Status:
Temperature
simulation
value
*1: DD and DTM (excluding EJX HART 5 DTM based on FDT1.2)
*2: EJX HART 5 DTM based on FDT1.2
*3: Depend on the setting of hardware switch
*4: Depend on the direction of range over (high or low)