Yokogawa YVP20S - Manual (Page 59)

6-18
<Toc> <Ind> <6. QUICK TOUR OF ValveNavi>
IM 21B04C50-01E
6.14 PID Control Dialog
The PID Process Controller dialog contains the tools for managing the PID function block.
It is composed of frames that group controls and displays. The PID State frame displays
and controls the PID states (block modes), the setpoint and process variable, and the
Device tagname. In Manual State (M), drag the PID output slider to move the valve. In
Local State (L), drag the Setpoint Slider (or enter a value in the Setpoint text box) to change
the process variable setpoint. In Cascade (C), and in Remote cascade (R), the setpoint is
controlled by a function block or remote application.
Figure 6.18 PID Process Controller Dialog
Figure 6.19 Change Tuning Parameters Dialog