Yokogawa YVP20S - Manual (Page 78)

9-1
IM 21B04C50-01E
<Toc> <Ind> <9. CONFIGURATION SERVICES>
9. CONFIGURATION SERVICES
Configuration services provide the tools to read and/or set parameters required for
successful communications and control. Each set of tools is grouped in a page with
a tab.
CAUTION
Do not turn off power for 60 seconds after writing configuration data. Data may not be
saved. See positioner instruction manual.
9.1 Configuration - General
This page of the general configuration of the device includes Device Info, Block Tag Info
and device installation options.
Figure9.1 Configure General
WARNING
Do not change Device Tag or Node Address while NI Configurator or other host software is
running. These network parameters should be changed only when configuring a positioner
connected to a segment that is not controlling a process.